IT-988G
The IT-988G is an advanced low CTE, high Tg (190° C by TMA) and ultra low loss material. This material is especially designed for high speed data rate applications, like the 100G switch, wireless applications, backplane. With a very stable SI performances in various type of environment, IT-988G is also suitable for Radar and Antenna application. IT-988G also exhibit high thermal and CAF reliability.
Application
Server/Storage/Switch
Backplane
Telecom
Base station
Radio Frequency (RF) & Micro Wave application
Key Features
100G/400G Switch solution
Advanced High Tg Resin Technology
Lower Dk (‹3.6 @ 10GHz) and Ultra low Df (‹0.0029 @ 10GHz)
Stable Dk/Df across the frequency range
Compatible with modified FR-4 processes
High thermal & CAF reliability
Property
Items |
Methods |
IT-988G |
Tg (℃) |
DSC |
191 |
T-288 (w/ 1 Oz Cu, min) |
TMA |
>120 |
Td-5%(℃ ) |
TGA 5% loss |
420 |
CTE (ppm/℃) |
a1/a2 |
57/341 |
CTE (%), 50-260℃ |
TMA |
3.1 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.61 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.0029 |
PDF 下載
IT-968
The IT-968 is an advanced low CTE, high Tg (185° C by DSC) and ultra low loss material. This material is designed not only for standard multilayer PWBs, but also for high speed data rate application, like the switch (100G), wireless application. Due to the SI performance is stable with different environment, it is also suitable for Radar and Antenna application. IT-968 also exhibit high thermal and CAF reliability.
Application
Server/Storage/Switch
Backplane
Telecom
Base station
Radio Frequency
Key Features
100G/400G Switch solution
Advanced High Tg Resin Technology
Lower Dk (‹3.8 @ 10GHz) and Ultra low Df (‹0.005 @ 10GHz)
Stable Dk/Df with different environment
Compatible with modified FR-4 processes
High thermal & CAF reliability
Property
Items |
Methods |
IT-968 |
Tg (℃) |
TMA |
190 |
T-288 (w/ 1 Oz Cu, min) |
TMA |
120+ |
Td-5%(℃ ) |
TGA 5% loss |
400 |
CTE (ppm/℃) |
a1/a2 |
45/260 |
CTE (%), 50-260℃ |
TMA |
2.2 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.7 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.0050 |
PDF下载
IT-958G
IT-958G is a halogen free, High Tg (175° C by DSC), advanced Multifunctional Epoxy and low loss material. This material has low Dk and low Df performance. IT-958G is designed not only for standard multilayer PWBs, but also high speed 3S (Server/Storage/Switch) application.
Application
Server/Storage/Switch
Backplane
Telecom
Base station
Key Features
Advanced High Tg Resin Technology
Excellent electrical performance
Lower Dk (‹3.8 @ 10GHz) and low Df (‹0.007 @ 10GHz)
Stable Dk/Df with different environment
Property
Items |
Methods |
IT-958G |
Tg (℃) |
DSC |
175 |
T-288 (w/ 1 Oz Cu, min) |
TMA |
60+ |
Td-5%(℃ ) |
TGA 5% loss |
400 |
CTE (ppm/℃) |
a1/a2 |
40/230 |
CTE (%), 50-260℃ |
TMA |
2.5 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.7 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.007 |
PDF下载
IT-150DA
IT-150DA is a High Tg (180° C by DSC), advanced Multifunctional Epoxy and low loss material. This material has low Dk and low Df performance. IT-150DA is designed not only for standard multilayer PWBs, but also for Radar application. This material is also suitable for 3S (Server/Storage/Switch) application.
Application
Server/Storage/Switch
Backplane
Telecom
Base station
Radio Frequency
Key Features
Automotive Radar application
Advanced High Tg Resin Technology
Excellent electrical performance
Lower Dk (‹3.7 @ 10GHz) and low Df (‹0.007 @ 10GHz)
Stable Dk/Df with different environment
Property
Items |
Methods |
IT-150DA |
Tg (℃) |
DSC |
180 |
T-288 (w/ 1 Oz Cu, min) |
TMA |
30+ |
Td-5%(℃ ) |
TGA 5% loss |
360+ |
CTE (ppm/℃) |
a1/a2 |
45/250 |
CTE (%), 50-260℃ |
TMA |
2.6 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.64 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.0065 |
PDF下载
IT-200LK
IT-200LK is a low CTE, High Tg (200° C by DSC), Multifunctional Epoxy and low loss material. This material exhibit low Dk/Df and excellent reliability performance, designed not only for standard multilayer PWBs, but also for 3S(Server/Storage/Switch) application.
Application
Server/Storage/Switch
Backplane
Telecom
Base station
Key Features
Advanced High Tg Resin Technology
Low Dk (‹3.8 @ 10GHz) and low Df (‹0.009 @ 10GHz)
Stable Dk & Df performance
Excellent reliability performance
Compatible with most FR-4 processes
Property
Items |
Methods |
IT-200LK |
Tg (℃) |
DSC |
200 |
T-288 (w/ 1 Oz Cu, min) |
TMA |
30+ |
Td-5%(℃ ) |
TGA 5% loss |
370 |
CTE (ppm/℃) |
a1/a2 |
40/200 |
CTE (%), 50-260℃ |
TMA |
2.5 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.66 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.0083 |
PDF下载
IT-170GRA1BS/IT-170GRA1TC
The IT-170GRA1 is a high Tg (180° C by DSC), halogen free epoxy and lower mid loss material with high thermal reliability, low CTE and CAF resistance. This green material is designed for industrial PC and 3S(server/storage/switch) application with aggressive cost.
Applications
Server/Storage/Switch
Routers
Backplane
Telecom
Base station
Key Features
Halogen free, High-Tg (180oC)
Lower Dk (‹3.9 @ 10GHz) and low Df (‹0.010 @ 10GHz)
Compatible with High Tg standard FR-4 processes
High thermal & CAF resistance reliability
Environmental friendly materials
Property
Items |
Methods |
IT-170GRA1 |
Tg (℃) |
DSC |
180 |
T-288 (w/ 1 Oz Cu, min) |
TMA |
60+ |
Td-5%(℃ ) |
TGA 5% loss |
380 |
CTE (ppm/℃) |
a1/a2 |
45/200 |
CTE (%), 50-260℃ |
TMA |
2.4 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.9 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.010 |
PDF下载
IT-988GSE
The IT-988G is an advanced low CTE, high Tg (~190° C by TMA), halogen free, low Dk and ultra-low loss material. This material is especially designed for leading edge high speed applications, like the 56Gbps per channel data rates using PAM-2 or PAM-4 signaling. The product offers very stable dielectric properties and operates very well at 14 GHz and 28 GHz Nyquist frequencies required for 56Gbps+ data rates. The product is designed for enterprise applications ranging from >400 Gbps data rates into multi-channel terabit rates. The product uses low DK glass which helps with the skew related issues. The prepreg constructions are designed with spread glass and laminates offer multi-ply spread glass constructions to reduce the fiber weave effect. Due to very stable Dielectric properties, IT-988GSE is also suitable for Radar and Antenna applications as well as hybrid and mixed mode RF & High Speed digital designs. IT-988GSE also exhibits high thermal and CAF reliability.
Application
56Gbps+ per channel applications
Server/Storage/Switch
Supercomputer networks
Backplanes and daughter cards
Telecom and Base station applications
Hybrid designs
Radio Frequency (RF) & Micro Wave application
Key Features
100G/400G Switch solution
Advanced High Tg Resin Technology
Lower Dk (‹3.25 @ 10GHz) and Ultra low Df (‹0.0015 @ 10GHz)
Stable Dk/Df across the frequency, temperature and humidity range
Compatible with modified FR-4 processes
High thermal & CAF reliability
Excellent dimensional stability
Very stable DK/Df with Temperature
Ability to use very low-profile Copper for reduced insertion loss
Highly suitable for Hybrids, Ability to make high layer count boards
Property
Items |
Methods |
IT-988GSE |
Tg (℃) |
TMA |
185 |
T-300 (w/ 1 Oz Cu, min) |
TMA |
60+ |
Td-5%(℃ ) |
TGA 5% loss |
405 |
CTE (ppm/℃) |
a1/a2 |
56/302 |
CTE (%), 50-260℃ |
TMA |
2.85 |
Dk @ 10 GHz |
IPC TM-650 2.5.5.13 |
3.25 |
Df @ 10 GHz |
IPC TM-650 2.5.5.13 |
0.0015 |
PDF 下載
IT-88GMW-3.0
IT-88GMW-3.0 is an advanced ultra-low loss & high Tg (185° C by TMA) material for demanding Radio frequency applications. The material is designed for long range, short range and medium range Radars used for Autonomous driving or Advanced driver assist systems operating in the 76-81 GHz. frequency range. The product offers better dissipation factor and insertion loss than fiber reinforced PTFE products. Its higher elastic modulus helps reduce mismatch in hybrid applications. The thermal conductivity is higher than PTFE based systems and therefore the product is also suitable for demanding 5G Base stations, power amplifiers and antenna applications which are expected to operate in the mm wave range of frequencies and also require high power handling capability. The product can be paired with a full prepreg offering to build high reliability multilayer boards. The dielectric properties are very stable with temperature and therefore very suitable for thermal cycling requirements in the automotive segment.
Application
Automotive LRR, MRR and SRR at76-81 GHz and 24 GHz
5 G Base Stations & mm wave applications
Distributed Antenna Systems, GPS satellite Antenna
Point to point – microwave links
Key Features
Very low loss ~0.0012 at 10 GHz.
Excellent dimensional stability
Very stable DK/Df with Temperature
Ability to use very low profile Copper for reduced insertion loss
Highly suitable for Hybrids, Ability to make high layer count boards
Full prepreg offering, Compatible with modified FR-4 processes
Property
Items | Methods | IT-88GMW-3.0 |
Tg (℃) | TMA | 185 |
T-300 (w/ 1 Oz Cu, min) | TMA | 60+ |
Td-5 %( ℃ ) | TGA 5% loss | 425 |
CTE (ppm/℃) | a1/a2 | 72/350 |
CTE (%), 50-260℃ | TMA | 3.8 |
Dk @ 10 GHz | IPC TM-650 2.5.5.13 | 3.0 |
Df @ 10 GHz | IPC TM-650 2.5.5.13 | 0.0012 |
IPDF 下載 |
IT-88GMW-3.15
IT-88GMW-3.15 is an advanced ultra-low loss & high Tg (185° C by TMA) material for demanding Radio frequency applications. The material is designed for long range, short range and medium range Radars used for Autonomous driving or Advanced driver assist systems operating in the 76-81 GHz. frequency range. The product offers better dissipation factor and insertion loss than fiber reinforced PTFE products. Its higher elastic modulus helps reduce mismatch in hybrid applications. The thermal conductivity is higher than PTFE based systems and therefore the product is also suitable for demanding 5G Base stations, power amplifiers and antenna applications which are expected to operate in the mm wave range of frequencies and also require high power handling capability. The product can be paired with a full prepreg offering to build high reliability multilayer boards. The dielectric properties are very stable with temperature and therefore very suitable for thermal cycling requirements in the automotive segment. The product matches the CTE of copper in X and Y planes thereby reducing stress during packaging and subsequent thermal cycling.
Application
Automotive LRR, MRR and SRR at76-81 GHz and 24 GHz
5 G Base Stations & mm wave applications
Distributed Antenna Systems, GPS satellite Antenna
Point to point – microwave links
Key Features
Very low loss ~0.0014 at 10 GHz.
Excellent dimensional stability
Very stable DK/Df with Temperature
Ability to use very low profile Copper for reduced insertion loss
Highly suitable for Hybrids, Ability to make high layer count boards
Full prepreg offering, Compatible with modified FR-4 processes
Property
Items | Methods | IT-88GMW-3.15 |
Tg (℃) | TMA | 185 |
T-300 (w/ 1 Oz Cu, min) | TMA | 60+ |
Td-5 %( ℃ ) | TGA 5% loss | 425 |
CTE (ppm/℃) | a1/a2 | 65/280 |
CTE (%), 50-260℃ | TMA | 3.2 |
Dk @ 10 GHz | IPC TM-650 2.5.5.13 | 3.15 |
Df @ 10 GHz | IPC TM-650 2.5.5.13 | 0.0014 |
IPDF 下載 |
IT-150GS
The IT-150GS is a medium Tg (>150° C by DSC), halogen free multifunctional epoxy and middle loss material with high thermal reliability (18L/less than 100mil) and CAF resistance. This green material is designed for server application, especially for low cost solution.
Application
Server/Storage/Switch
Routers
Telecom
Base station
Key Features
Halogen free, Medium-Tg (>150oC)
Middle loss
Compatible with FR-4 processes
High thermal & CAF resistance reliability
Environmental friendly materials
Property
Items |
Methods |
IT-150GS |
Tg (℃) |
DSC |
150+ |
T-288 (w/ 1 Oz Cu, min) |
TMA |
60+ |
Td-5%(℃ ) |
TGA 5% loss |
365 |
CTE (ppm/℃) |
a1/a2 |
35/230 |
CTE (%), 50-260℃ |
TMA |
3.1 |
Dk @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
3.9 |
Df @ 10 GHz (RC 50%) |
IPC TM-650 2.5.5.13 |
0.012 |
PDF下載
IT-8338G
IT-8338G is an advanced ultra-low loss & high Tg (185° C by TMA) material for demanding Radio frequency applications. The material has a Dielectric constant of 3.38 and is designed for the base stations, Antennas, LNBs for Direct broadcast systems and other RF applications. The product offers better dissipation factor and insertion loss than fiber reinforced Hydrocarbon materials. The product can be paired with a full prepreg offering to build high reliability multilayer boards or with other ITEQ materials for Hybrid constructions.
Applications Next Generation Halogen free product for
Base Stations, Power amplifiers
LNBs for Direct Broadcast systems
Antenna applications
Dipole antennas
Key Features
Very low loss ~0.0023 at 10 GHz.
Excellent dimensional stability
Very stable DK/Df with Temperature
Ability to use very low profile Copper for reduced insertion loss
Highly suitable for Hybrids, Ability to make high layer count boards
Full prepreg offering, Compatible with modified FR-4 processes
Property
Items | Methods | IT-8338G |
Tg (℃) | TMA | 185 |
T-300 (w/ 1 Oz Cu, min) | TMA | 60+ |
Td-5 %( ℃) | TGA 5% loss | 425 |
CTE (ppm/℃) | a1/a2 | 70/290 |
CTE (%), 50-260℃ | TMA | 3.9 |
Dk @ 10 GHz | IPC TM-650 2.5.5.13 | 3.38 |
Df @ 10 GHz | IPC TM-650 2.5.5.13 | 0.0023 |
PDF下载
IT-8350G
IT-8350G is an advanced ultra-low loss & high Tg (185° C by TMA) material for demanding Radio frequency applications. The material has a Dielectric constant of 3.5 and is designed for the emerging 4.5 G LTE and 5G applications requiring halogen free materials with stringent thermal stability with temperature and frequency requirements. The product is also designed for long range, short range and medium range Radars used for Autonomous driving or advanced driver assist systems operating in the 24 GHz range. The product offers better dissipation factor and insertion loss than fiber reinforced Hydrocarbon materials. The product can be paired with a full prepreg offering to build high reliability multilayer boards or with other ITEQ materials for Hybrid constructions.
Applications Next Generation Halogen free product for
4 G LTE Base Stations, Power amplifiers
4.5G LTE Base stations, Antennas and PAs
24 GHz Automotive radar applications
77 GHz. SRR and MRR systems
5 G Base Stations & mm wave applications
Direct Broadcast systems
Antenna applications
CPE antennas
Key Features
Very low loss ~0.0025 at 10 GHz.
Excellent dimensional stability
Very stable DK/Df with Temperature
Ability to use very low profile Copper for reduced insertion loss
Highly suitable for Hybrids, Ability to make high layer count boards
Full prepreg offering, Compatible with modified FR-4 processes
Property
Items | Methods | IT-8350G |
Tg (℃) | TMA | 185 |
T-300 (w/ 1 Oz Cu, min) | TMA | 60+ |
Td-5 %( ℃) | TGA 5% loss | 425 |
CTE (ppm/℃) | a1/a2 | 65/268 |
CTE (%), 50-260℃ | TMA | 3.8 |
Dk @ 10 GHz | IPC TM-650 2.5.5.13 | 3.5 |
Df @ 10 GHz | IPC TM-650 2.5.5.13 | 0.0025 |